De lichtspecialist uit België in A-merk verlichting

Osram HTM150 Transfo 50-150W

Lamp wattage	50…150 W
Line current	0.57 A
Power factor λ	0.99
Operating frequency	40 kHz
Nominal output voltage	11.4 / 11.5 V
Input voltage AC	230…240 V
Mains frequency	50…60 Hz
System wattage	157.00 W
Input voltage range AC	207…264 V
Max. no. of ECGs on circuit breaker 10 A	16
Max. no. of ECGs on circuit breaker 16 A	26
ECG efficiency	95 %
Galvanic isolation primary/secondary	4.00 kV
Inrush current	1.1 A

Length	153.0 mm
Width	54.0 mm
Mounting hole spacing, length	146.0 mm
Height	36.0 mm
Mounting hole spacing, width	15.0 mm
Cable cross-section, input side	1.5 mm²
Cable cross-section, output side	2.5 mm²
Wire preparation length, input side	12 / 8.0 mm
Wire preparation length, output side	12 / 8.0 mm
Product weight	185.00 g

Ambient temperature range	0…+45 °C
Maximum temperature at tc test point	80 °C

Design / version	Compact with cable clamp

Dimming method	Trailing- or leading-edge phase control for inductive load dimmers
Overload protection	Automatic reversible
Overheating protection	Automatic reversible
Short-circuit protection	Automatic reversible
Max. cable length to lamp/LED module	2.0 m
Cable types, input side	NYM 3x1.5 / H05VV-F 3x1.0 / H03VV-F 3x1.5 mm²
Cable types, output side	NYM 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.0 / H05VV-F 2x1.5 / H03VV-F 2x0.75 / H03VV-F 2x1.5 mm²
Dimmable	Yes
Dimming range	0…100 %
No-load proof	Yes
Suitable for fixtures with prot. class	II

Approval marks – approval	VDE / VDE-EMC / E1 approval / GOST
Standards	Acc. to EN 61347/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 61047
Type of protection	IP20